How to Clean a Hurom Slow Juicer: Step-by-Step Guide

Clean your Hurom immediately after each use: switch it off, unplug it, disassemble the food-contact parts, rinse away fresh pulp and leave the components to dry fully. Immediate cleaning matters more than any claimed number of minutes because dried fibres are considerably harder to remove.

Before cleaning

• Switch off and unplug the juicer.
• Wait until moving parts have stopped.
• Follow the assembly and removal sequence in the manual for your exact model.
• Never immerse the motor base in water.

Daily cleaning steps

1. Empty the juice and pulp containers. Remove remaining pulp before it dries.
2. Disassemble the chamber. Separate the hopper, auger, chamber parts, outlet components and any removable seals according to the manual.
3. Rinse under running water. Use your fingers or the supplied brush to loosen fibres around grooves and outlets.
4. Inspect small openings. Celery and leafy greens can leave fibres around pulp outlets and seals.
5. Wash where needed. Use mild dishwashing liquid when required, then rinse thoroughly.
6. Air-dry completely. Place parts separately on a clean rack before reassembly.

Which Hurom model is easiest to clean?

The H310A is generally the simplest current choice for buyers prioritising compact components and a smaller everyday setup. The H400 and H410 are also designed to simplify rinsing compared with older fine-mesh systems, but their larger components reflect their greater capacity.

Actual cleaning effort depends on ingredients, batch size and how quickly you rinse the machine.

How to remove dried pulp

Soak removable food-contact parts in warm water with mild dishwashing liquid, then use the supplied cleaning brush. Avoid forcing sharp objects into outlets or scraping clear parts with abrasive tools.

What should you avoid?

• Do not immerse the motor base.
• Do not use steel wool, harsh abrasives or sharp picks.
• Do not use very hot water unless the manual states that the component can tolerate it.
• Do not assume every part is dishwasher-safe. Check the manual for the specific model.
• Do not reassemble parts while moisture remains trapped in seals or recesses.

When is deeper cleaning needed?

Inspect the machine regularly for residue, staining, odour or fibres in small openings. A deeper clean may be needed after ingredients such as celery, turmeric, beetroot or leafy greens. Staining does not always mean the part is unsafe, but persistent residue should be removed.

Frequently asked questions

How long should cleaning take?

There is no reliable universal time. A small batch rinsed immediately will be faster than a large fibrous batch left to dry. Focus on complete cleaning rather than racing a marketing stopwatch.

Can Hurom parts go in a dishwasher?

Check the manual for your exact model and component. Do not assume all parts are dishwasher-safe.

Why is pulp stuck in the outlet?

Long fibres may collect around the pulp outlet. Cut fibrous ingredients according to the manual, alternate them with suitable higher-moisture produce and clean the outlet immediately after use.

Where can I get cleaning tools or replacement parts?

Browse Hurom spare parts and accessories or contact Hurom Singapore if the required component is not listed.